TR-DOS with ramdisc for all 1MB ZX clones

My idea is modify any new tr-dos 6.xx for use on other zx clones than only Pentagon 1024. For example tr-dos 6.11E exist in version for Pentagon 1024 and can be compiled also for ATM TURBO computer. Also exist tr-dos 6.11P for ZXM PHOENIX using paging ports 7FFD and 1FFD.

Can anyone help me with modification one of this versions (ideal 6.11P) for ZX PROFI 1024 or SCORPION 1024 memory paging ports ? I see in tr-dos 6.11P table of values for paging ports then modification for other clones can be easy = only rewrite values in table and ram paging ports. Which routines I must modify in source code ?

source code of tr-dos 6.11P (ZXM PHOENIX):
http://micklab.narod.ru/file/trdos6_11p.rar

I also need change size of ramdisc to 640kB after format.

And what about this routine ?

Код:

---

            LD      BC,#EFF7
            LD      D,CMOS_F_PAGE
            LD      A,#80
            OUT    (C),A
            LD      B,#DF
            OUT    (C),D
            LD      B,#BF
            IN      E,(C)
            XOR    A
            LD      B,#EF
            OUT    (C),A
            LD      D,A
            LD      HL,PG_TAB
            ADD    HL,DE
            LD      BC,#1FFD
            LD      A,(HL)
            OUT    (C),A
            INC    HL
            LD      A,(HL)
            LD      B,#7F
            OUT    (C),A
            POP    IX
            EI
            RET

---

Hmm, your source is bad:

Код:

---

SjASMPlus Z80 Cross-Assembler v1.07 RC7 (build 02-04-2008)
Pass 1 complete (0 errors)
Pass 2 complete (0 errors)
> Free space at 0x0031: 7 byte(s)
trdos611p.asm(376): error: Label not found: TfndRD
> Free space at 0x083F: 193 byte(s)
> Free space at 0x0B01: 1303 byte(s)
> Free space at 0x1788: 29 byte(s)
> Free space at 0x1F00: 22 byte(s)
trdos611p.asm(4977): error: Label not found: MAGICER
trdos611p.asm(4994): error: Label not found: MAGSTOPDISK
trdos611p.asm(5598): error: Label not found: MAGregR
trdos611p.asm(5639): error: Label not found: MAGsetR
> Free space at 0x3215: 7 byte(s)
> Free space at 0x377E: 1202 byte(s)
> Free space at 0x3CAD: 77 byte(s)
> Free space at 0x3FF6: 10 byte(s)
trdos611p.asm(7337): error: Error opening file: out\TR-DOS 6.11P.ROM

---

Compiled ok :-) I go test it

Tr-dos 6.11p now work with ZX PROFI 1024 :-)

My idea is : same ramdisc layout in 1MB memory for Pentagon 1024, Scorpion 1024, ZX PROFI 1024. I must make also version for Scorpion 1024.

My PROFI interface(for ZX128+2) support Pentagon memory, Scorpion memory and ZX Profi memory paging. All three modes use full 1MB (same ram). I can switch between memory modes + roms and ramdisc will always usable :-)

---------- Post added at 19:29 ---------- Previous post was at 19:27 ----------

Цитата:

---

Сообщение от Keeper

Are you sure? :)

---

Sorry, my bug. SJASMPLUS compile ok :-)

Цитата:

---

Сообщение от Keeper

Awesome! Also you can take trdos from attached file and add some more configuration options. That was planned some time ago but something goes wrong in my head... :) And everything should be checked twice, cos sources were built in 2010, so some issues could be forgotten... :v2_dizzy_vodka:

---

Yes, new source contain config at begin. Is possible select computer type, ramdisc drive, etc...

I have one universal source code of tr-dos for 4 memory models : ZX PROFI 1024, PENTAGON 1024, SCORPION 1024, ZXM PHOENIX 1024/2048.
I test all 4 tr-dos versions in unrealspeccy emulator and work correct :-)

Цитата:

---

Сообщение от Keeper

This "state of the art" version of trdos I want to be destroyed everywhere on the internet :) I will ask Mick to delete it later. Here is the right version for ZXM-Phoenix...

---

Next bug in your TR-DOS 6.11P - bad text on screen (show "BETA2048s" instead "BETA2048"):
http://velesoft.speccy.cz/other/trdo...text_error.png

BUG detected: in your source code absent data of text (from label TfndRD) :

Actual bad source:

Код:

---

            DISPLAY "Free space at ",$,": ",/D,#1018-$," byte(s)"
            DS      #1018-$,#FF

---

And here is correct code (used from original trdos 6.11E):

Код:

---

            DISPLAY "Free space at ",$,": ",/D,#1000-$," byte(s)"
            DS      #1000-$,#FF

TfndRD      DB      #16,9,5
            DB      "Found RAMDISK memory",0

---

TR-DOS 6.11Q for Pentagon 1024, ZX Profi 1024, Scorpion 1024, ZXM Phoenix 1024/2048

http://velesoft.speccy.cz/other/TR-D...NTAGON1024.png http://velesoft.speccy.cz/other/TR-D..._PROFI1024.png
http://velesoft.speccy.cz/other/TR-D...ORPION1024.png http://velesoft.speccy.cz/other/TR-D...XM_PHOENIX.png

First betaversion of TR-DOS roms:
http://velesoft.speccy.cz/other/TRDO...ETAVERSION.zip

source code of TR-DOS 6.11Q (this is only beta version !!!):
http://velesoft.speccy.cz/other/trdo...taversion1.zip

Source contain full NMI support from tr-dos 6.11e and table for memory paging ports is moved to free space in trdos rom.

Цитата:

---

Сообщение от Keeper

This "state of the art" version of trdos I want to be destroyed everywhere on the internet :) I will ask Mick to delete it later. Here is the right version for ZXM-Phoenix...

---

What changes are in your tr-dos 6.11p ? (from original 6.11e)

NMI routines you replace with paging table, RST0 is different (why ?), RTC support removed (why ?), any other changes ?

In TR-DOS6.11Q I refresh original NMI code and paging table is moved to free (unused) memory. Now is assembly without errors. But I need know if exist other modifications than only NMI and RAMDISC routines.

VELESOFT , is possible to integrate a token/command which changes the letter RAM-DISK instead of "D" for "A" into TR-DOS6.11Q? there are programs with "drive A only" problem.

---------- Post added at 17:23 ---------- Previous post was at 17:19 ----------

and back on "D". value of a variable can be stored in GLUK CMOS.