What's the maximum speed I should consider for the 128K*8 SRAM?
IS61C1024AL-12JLI would work as well?
What's the maximum speed I should consider for the 128K*8 SRAM?
IS61C1024AL-12JLI would work as well?
Pentagon 1024SL 2.2 + ZXM-GS + Z-Controller + TSFM + Tape-In
Compact 256 Turbo 1.1 (ZS Scorpion 256 INT, Port #FF, Port #FB) + Covox + ProfROM + NemoBus + Z-Controller
ZS Scorpion 256 Turbo+ + GMX + SMUC + ZXM-GS
Pentagon 48 + MIKAY128 + VG93 Turbo + NemoIDE + Stereo Covox + KJoy
Sprinter 2016S
ARGUS (x86) Project leader
---
Sorry, I don't speak Russian / К сожалению, я не говорю по-русски
i recommend to use CY7C109-15 or IDT71024S15. alliance memory may have artifacts on Sprinter.
both CY7C109-15 and IDT71024S15 and alliance memory and w24010as-35 work
Отправлено с моего M2 Note через Tapatalk
Скрытый текст
Специалист "УЦА" +SD-Vinxru +PS/2-Vinxru
PLM-X 128 + AY -эмуль на 8меге
Profi V3.2 - 768+Color-CP/M+ProfiExtender Solegstar
Profi V3.2 -1024 Sim30+Color-CP/M+ProfiExtender Solegstar
Pentagon 1024SL 1.42 - работает не совсем стабильно
ZXM-Phoenix V06
ZX-Evolition Rev C2 White FSP-MItX
Sprinter 2000 v.Zorel
Karabas128 + ZX-Taper by TrolSoft +DivSD +ScanDoubler
ZX-UNO v4.1 2М с 4 переключаемыми флешками
Поиск-1 - ждет ремонта
Корвет ПК8010 up to 8020
MisT 1.31
Galaksija + SMD
[свернуть]
Для запуска любая пойдёт, дальше уже по поведению выбирать, CY и IDT лучше всего работает , Winbond на одной из 4х прошивок работал вполне стабильно, альянс изначально устанавливался
Отправлено с моего M2 Note через Tapatalk
Скрытый текст
Специалист "УЦА" +SD-Vinxru +PS/2-Vinxru
PLM-X 128 + AY -эмуль на 8меге
Profi V3.2 - 768+Color-CP/M+ProfiExtender Solegstar
Profi V3.2 -1024 Sim30+Color-CP/M+ProfiExtender Solegstar
Pentagon 1024SL 1.42 - работает не совсем стабильно
ZXM-Phoenix V06
ZX-Evolition Rev C2 White FSP-MItX
Sprinter 2000 v.Zorel
Karabas128 + ZX-Taper by TrolSoft +DivSD +ScanDoubler
ZX-UNO v4.1 2М с 4 переключаемыми флешками
Поиск-1 - ждет ремонта
Корвет ПК8010 up to 8020
MisT 1.31
Galaksija + SMD
[свернуть]
Хотел ещё ISL61C1024-20 испытать, но в наличии было только 2шт., поэтому эксперимент провалился
Отправлено с моего M2 Note через Tapatalk
Скрытый текст
Специалист "УЦА" +SD-Vinxru +PS/2-Vinxru
PLM-X 128 + AY -эмуль на 8меге
Profi V3.2 - 768+Color-CP/M+ProfiExtender Solegstar
Profi V3.2 -1024 Sim30+Color-CP/M+ProfiExtender Solegstar
Pentagon 1024SL 1.42 - работает не совсем стабильно
ZXM-Phoenix V06
ZX-Evolition Rev C2 White FSP-MItX
Sprinter 2000 v.Zorel
Karabas128 + ZX-Taper by TrolSoft +DivSD +ScanDoubler
ZX-UNO v4.1 2М с 4 переключаемыми флешками
Поиск-1 - ждет ремонта
Корвет ПК8010 up to 8020
MisT 1.31
Galaksija + SMD
[свернуть]
Pentagon 1024SL 2.2 + ZXM-GS + Z-Controller + TSFM + Tape-In
Compact 256 Turbo 1.1 (ZS Scorpion 256 INT, Port #FF, Port #FB) + Covox + ProfROM + NemoBus + Z-Controller
ZS Scorpion 256 Turbo+ + GMX + SMUC + ZXM-GS
Pentagon 48 + MIKAY128 + VG93 Turbo + NemoIDE + Stereo Covox + KJoy
Sprinter 2016S
ARGUS (x86) Project leader
---
Sorry, I don't speak Russian / К сожалению, я не говорю по-русски
Hey there, now that my SIMM slot has finally arrived (8 weeks delivery time) I started up my sprinter for the first time yesterday
Works great so far, except that booting from disk isn't possible. I'm using this image from the velesoft site: https://velesoft.speccy.cz/sprinter/...age+writer.zip + rawrite3.com from freeDOS (http://www.ibiblio.org/pub/micro/pc-.../disk/rawrite/).
On the DOS machine I can see the contents of the disk, but on the sprinter I get maybe 10 seconds of disk activity before the computer hangs. Very occasionally I get a reboot.
What would be an alternative approach to make a HDD bootable? I successfully formated one of my drives on my DOS machine and copied everything from the Bootdisk over to the freshly formated partition, sadly that didn't work either.
Pentagon 1024SL 2.2 + ZXM-GS + Z-Controller + TSFM + Tape-In
Compact 256 Turbo 1.1 (ZS Scorpion 256 INT, Port #FF, Port #FB) + Covox + ProfROM + NemoBus + Z-Controller
ZS Scorpion 256 Turbo+ + GMX + SMUC + ZXM-GS
Pentagon 48 + MIKAY128 + VG93 Turbo + NemoIDE + Stereo Covox + KJoy
Sprinter 2016S
ARGUS (x86) Project leader
---
Sorry, I don't speak Russian / К сожалению, я не говорю по-русски
Shockwav3, The disc must be prepared directly on the sprinter.
Here is the instruction https://zx-pk.ru/threads/10983-sprin...l=1#post879887
Последний раз редактировалось tank-uk; 09.05.2019 в 17:49.
Скрытый текст
Специалист "УЦА" +SD-Vinxru +PS/2-Vinxru
PLM-X 128 + AY -эмуль на 8меге
Profi V3.2 - 768+Color-CP/M+ProfiExtender Solegstar
Profi V3.2 -1024 Sim30+Color-CP/M+ProfiExtender Solegstar
Pentagon 1024SL 1.42 - работает не совсем стабильно
ZXM-Phoenix V06
ZX-Evolition Rev C2 White FSP-MItX
Sprinter 2000 v.Zorel
Karabas128 + ZX-Taper by TrolSoft +DivSD +ScanDoubler
ZX-UNO v4.1 2М с 4 переключаемыми флешками
Поиск-1 - ждет ремонта
Корвет ПК8010 up to 8020
MisT 1.31
Galaksija + SMD
[свернуть]
I can't even get that far ... booting from floppy doesn't work.
This is the furthest I've got. Usually it hangs at the "Start from Diskette ..." sometimes it gets to the OK. This was the first time I actually got the invalid bootsector message.
I'm using a KR1818VG93 from Quasar (the one with the "windows" in the case). Exchanging it with another one, I get the "OK" message a lot more reliable.
Both chips and the drive used work nicely on my Pentagon48.
I've ordered a MB8877 ... maybe that one works more reliable when used with HD floppies.
Pentagon 1024SL 2.2 + ZXM-GS + Z-Controller + TSFM + Tape-In
Compact 256 Turbo 1.1 (ZS Scorpion 256 INT, Port #FF, Port #FB) + Covox + ProfROM + NemoBus + Z-Controller
ZS Scorpion 256 Turbo+ + GMX + SMUC + ZXM-GS
Pentagon 48 + MIKAY128 + VG93 Turbo + NemoIDE + Stereo Covox + KJoy
Sprinter 2016S
ARGUS (x86) Project leader
---
Sorry, I don't speak Russian / К сожалению, я не говорю по-русски
Эту тему просматривают: 1 (пользователей: 0 , гостей: 1)