ROM files structure

[Black_Cat]

Readability of port #3EDF is used also for 100% detection of SLAVE K-MOUSE interface.

Readability of port #FEDF is used also for 100% detection of MASTER K-MOUSE interface.

This is not a problem. Let the master reads the port #7FFD, a slave read port #1FFD or #FE. Get 100% detection of the master / slave.

[Advertiser]

[VELESOFT]

This is not a problem. Let the master reads the port #7FFD, a slave read port #1FFD or #FE. Get 100% detection of the master / slave.

K-MOUSE can use only adress lines A15, A10,A8-A0. It's impossible detect writing to port 1FFD. For correct 1FFD writing must be used also adress lines A14-A12

K-MOUSE is designed as single interface with possibility switch to slave ports. (all features is same as in master). Reading port #FE will possible only after source code modification, but this mouse can't use switching between master/slave and will fixed as slave only or master only device.