Подключение SID'а к Спектруму

[BYTEMAN]

Что такое корка?

[Totem]

Ewgeny7,угу в свободном доступе, точно нет. Ну где взять железку известно.

BYTEMAN, http://opencores.org/projects
дабы не мнгогословить

[BYTEMAN]

BYTEMAN, http://opencores.org/projects
дабы не мнгогословить

Софтверное ядро имеется ввиду?

[Totem]

BYTEMAN, можно вообщем то и так сказать

[Poopi]

I'm thinking of adding the SID support to Speccy 2010. Could you give me the link with a Spectrum test program/player of any kind and schematics/info how the SID is connected to the bus? Thanks.

[BYTEMAN]

I'm thinking of adding the SID support to Speccy 2010. Could you give me the link with a Spectrum test program/player of any kind and schematics/info how the SID is connected to the bus? Thanks.

Hi! Current version of SID-Card is not final. We want to add a real 6502 to the card. But if you wish to add current version, look at this post (the latest version of player). SID is connected to the bus at #xxCF ports array (where xx corresponds to SID address inputs). But we recommend you to wait until we'll release a final "standardized" version of card. Thanks.

зы. Ну как, неплохо у меня с английским?

[Advertiser]

[Poopi]

Hi! Current version of SID-Card is not final. We want to add a real 6502 to the card. But if you wish to add current version, look at this post (the latest version of player). SID is connected to the bus at #xxCF ports array (where xx corresponds to SID address inputs). But we recommend you to wait until we'll release a final "standardized" version of card. Thanks.

Thanks BYTEMAN. I've been able to connect the SID model to the Speccy with #xxCF ports (15-13 set to any value). I can write simple commands to get the sound but none of the SID Player demos works. Which ports are the using?

[BYTEMAN]

Thanks BYTEMAN. I've been able to connect the SID model to the Speccy with #xxCF ports (15-13 set to any value). I can write simple commands to get the sound but none of the SID Player demos works. Which ports are the using?

We used this version of player. This player uses ports of ZS-Scorpion 256 Turbo+. This player makes RAM to appear instead of ROM page to have continuous array of memory.

[Poopi]

BYTEMAN,

Thanks a lot. Finally it seems to be working. First of all I had to implement the Scorpion memory map - done. Then to check the port mapping to not overlap with SamCoupe. But finally I DID it. Works like a charm...ok it just works with 14 and 28MHz clock
The drwaback is that the SID emulation is lacking the filters so the sound is kinda harsh....

[Cat_Alex/QRP]

Нашел я тут немного времени, прикрутил SID к анрилу (плюс убил пару багов). Результат *****кодинга (в комплекте несколько сидовых мелодий, в папке sids):
http://narod.ru/disk/2419223001/us03...(sid).rar.html
Тут SID сидит на порте xxCF, в старшем байте - номер регистра. Насчет конфликтов пока не думал.

Перезалейте