Код:
RT-11FB V05.07
.SET TT SCOPE
.sho conf
RT-11FB V05.07
Booted from RK0:RT11FB
USR is set SWAP
EXIT is set SWAP
KMON is set NOIND
MODE is set NOSJ
TT is set NOQUIET
ERROR is set ERROR
SL is set OFF
EDIT is set KED
FORTRAN is set FORTRA
KMON nesting depth is 3
CLI is set DCL, CCL, UCL, NO UCF
PDP 11/24 Processor
512KB of memory
FP11 Hardware Floating Point Unit
Extended Instruction Set (EIS)
Memory Management Unit
60 Hertz System Clock
FPU support
* TSX-Plus Version 6.50 *
Copyright (c) 1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991
an unpublished work by S&H Computer Systems, Inc., Nashville, TN, USA
(S&H) covered by U.S. Patent No. 4,642,756. All rights reserved.
This material contains the valuable properties and trade secrets of S&H
and may not be used except by the express written permission of S&H.
Distributed by S&H Computer Systems, Inc.
Licensed for use Here, There and Everywhere in The World.
License # = 999-TPS-00000
Line # 1
.sho all
TSX-Plus Version = 6.50
Date unknown
Active Handler Handler Handler
Device I/O Status V. base P. base size CSR Vector
------ ------ ------ ------- ------- ------- ------ ------
TT 0 000004
LD 0 102446
CL 0 016057 035470 000000 512
DL 0 102405 120000 015423 1418 174400 160
RK 0 100000 120000 015416 280 177400 220
Assignments:
SY --> RK0:
DK --> RK0:
There are no allocated devices
Uptime: 00:00:02
System use: Run=8%, I/O-wait=4%, Swap-wait=0%, Idle=86%
I/O Activity: User I/O=8%, Swapping I/O=0%
Job Line Pri State Size Connect CPU time Program Job name
--- ------ --- ------- ----- --------- -------- ------- ------------
1* 1(0) 50 IN 39Kb 00:01:00 00:00:00 KMON
Line Type Vector CSR Terminal Speed Active Line Name
---- ----- ---------- ------ -------- -------- ------ ------------
1* Oper. DL 060 177560 VT200 9600 8N Yes Console
CL version number 18.
Unit Line Job Options
---- ---- ---- ----------------------------
CL0 none none
CL1 none none
CL2 none none
CL3 none none
Total installed memory = 512Kb
Size of unmapped TSX and handlers = 29Kb (070146)
Size of mapped TSX system regions = 77Kb
Total size of TSX and mapped data = 126Kb
Size of mapped device handlers = 2Kb
Size of sharable run-time systems = 0Kb
Size of data cache buffer area = 33Kb
Space available for user jobs = 349Kb
Swappable job context area = 7Kb
Current job memory limit = 56Kb
Maximum job memory limit = 64Kb
QUAN0 = 2
QUAN1 = 20
QUAN1A = 2
QUAN1B = 2
QUAN1C = 1
QUAN2 = 10
QUAN3 = 20
INTIOC = 30
HIPRCT = 40
There are no spooled devices
Logical subset disks:
No logical disks are mounted
Mounted devices:
Device Associated jobs
---------- ------------------------------
RK0: 1
Shared run-time systems:
There are no named regions
Program Attributes and Privileges
-------------- -----------------------------------------
RK0:DUP.SAV DUP/PRIV=(SYSPRV,NODEBUG)
RK0:IND.SAV NOWAIT/IND/PRIV=(NODEBUG)
RK0:KED.SAV SINGLECHAR/NOWAIT/HIGH/PRIV=(NODEBUG)
RK0:KEX.SAV SINGLECHAR/NOWAIT/HIGH/PRIV=(NODEBUG)
RK0:K52.SAV SINGLECHAR/NOWAIT/HIGH/PRIV=(NODEBUG)
RK0:LOGON.SAV LOCK/BYPASN/PRIV=(BYPASS,SETNAME,SETPRV,SYSPRV,
NODEBUG)
RK0:PATCH.SAV SINGLECHAR/PRIV=(NODEBUG)
RK0:SETUP.SAV IOPAGE/SETUP/PRIV=(NODEBUG)
RK0:SYSMON.SAV /PRIV=(MEMMAP,NODEBUG)
RK0:TECO.SAV SINGLECHAR/NOWAIT/PRIV=(NODEBUG)
RK0:TRANSF.SAV SINGLECHAR/NOWAIT/NONINTERACTIVE/NOWINDOW/PRIV=(
NODEBUG)
RK0:TSAUTH.SAV BYPASN/PRIV=(NODEBUG)
RK0:TSXUCL.SAV TSXUCL/PRIV=(NODEBUG)
RK0:VTCOM.SAV SINGLECHAR/NOWAIT/MEMLOCK/PRIV=(PSWAPM,NODEBUG)
Authorized privileges: ALLOCATE,BYPASS,DEBUG,DETACH,GETCXT,MEMMAP,
MESSAGE,NFSREAD,NFSWRITE,OPER,PSWAPM,REALTIME,
RLOCK,SEND,SETNAME,SETPRV,SPFUN,SYSGBL,
SYSPRV,TERMINAL,WORLD,GROUP,SAME,SUBPROCESS,
UP1,UP2,UP3,UP4
Current privileges: ALLOCATE,BYPASS,DEBUG,DETACH,GETCXT,MEMMAP,
MESSAGE,NFSREAD,NFSWRITE,OPER,PSWAPM,REALTIME,
RLOCK,SEND,SETNAME,SETPRV,SPFUN,SYSGBL,
SYSPRV,TERMINAL,WORLD,GROUP,SAME,SUBPROCESS,
UP1,UP2,UP3,UP4
SL status: OFF,NOKED,NOTTYIN,SUBSTITUTE
VM not installed
.
Как примечание. Насколько я помню, RESORC определяет комп как UNIBUS, если есть switch регистр. Он у меня есть по умолчанию, так что.. Но UMR нет:
Ответить с цитированием
Сообщение от form
