Цитата Сообщение от mrcity Посмотреть сообщение
Hello!
Hello!
Цитата Сообщение от mrcity Посмотреть сообщение
I am experimenting with the DVK-3 (ДВК-3) in the US. I have made some floppy disk images for the HxC floppy disk emulator and my MX floppy disk driver. I would guess many of you would prefer the MY driver, but unfortunately I did not get one. Thus, I have to run RT-11 and Tetris with MX.
You can boot from the hard drive by giving commands:
Код:
@B
$DW[ВК]
Цитата Сообщение от mrcity Посмотреть сообщение
The project I wrote about on my blog was to make a keyboard emulator for the computer. To summarize it, I have the MS-7004 (МС-7004) keyboard. I found some spare DIN connectors so that I could expose the signals on a breadboard. This helped me research exactly how the computer and keyboard interact with each other. Then, I wrote some short code on an Arduino to output serial at the right data rate. My circuit design used various voltage regulators to provide the exact voltages required by the keyboard. Finally, I was able to spoof the keyboard with my Arduino,
It is much easier to translate the codes through the keyboard emulator. http://zx-pk.ru/threads/23119-emulya...l=1#post697539

Цитата Сообщение от mrcity Посмотреть сообщение
Maybe someday, I will point a webcam at the computer screen and let people use the fake keyboard through a Web interface.
At the same time, one should take into account that in real time it will most likely not be possible to control the computer, since the video signal transmission will be transmitted with a delay.