Похоже с таймексом разница не только в номере порта.

Port #FF is also used to enable/disable the timer interrupt and select which bank of memory should be used by the horizontal MMU. The byte to output will be interpreted thus:
D0-2: Screen mode. 000=screen 0, 001=screen 1, 010= hi-colour, 110=hi-res
D3-5: Sets the screen colour in hi-res mode.
000 - Black on white. 100 - Green on magenta.
001 - Blue on yellow. 101 - Cyan on red.
010 - Red on cyan. 110 - Yellow on blue.
011 - Magenta on green. 111 - White on black.
D6: If set disables the generation of the timer interrupt.
D7: Selects which bank the horizontal MMU should use. 0=DOCK, 1=EX.
Screen 0 is the normal screen at the start of video memory. Screen 1 uses the same format but is offset by 8K.

А в Пентагоне Hi-Color какими битами врубать? Вообще по EFF7 порту дока есть?

Это вообще неприятная ситуация. По западным клонам инфу раздобыть гораздо проще. Такое ощущение что западные колеги добросовестнее относятся к сбору и хранению документации. Хотел уже на http://www.zxspectrum.it/ доку скачать, но 34 метра - это для меня нереально.