Hi there,
is it possible to replace the 1556ХЛ8 on an ATM Turbo 2+ board with a GAL?
I do have a 7.11 board (which has a 20pin DIP footprint underneath the 1556ХЛ8)
I've found this .jed file so far ... has anyone successfully used it yet?
ATM Turbo 2+ 7.11 1556ХЛ8 -> GAL?
Hi there,
is it possible to replace the 1556ХЛ8 on an ATM Turbo 2+ board with a GAL?
I do have a 7.11 board (which has a 20pin DIP footprint underneath the 1556ХЛ8)
I've found this .jed file so far ... has anyone successfully used it yet?
Pentagon 48 + MIKAY128 + VG93 Turbo + Stereo Covox + KJoy
Москва 128 + AY
Pentagon 1024SL 2.2 + ZXM-GS + Z-Controller + TSFM + Tape-In
ZX Evolution Rev. C + ZX-MultiSound
Compact 256 Turbo 1.1 (ZS Scorpion 256 INT, Port #FF, Port #FB) + Covox + ProfROM + NemoBus + NemoIDE + ZXM-GS
ZS Scorpion 256 Turbo+ + GMX + SMUC + GS Classic 2MB
Sprinter 2016S
К сожалению, я не говорю по-русски / Sorry, I don't speak Russian
https://github.com/zxshock
С любовью к вам, Yandex.Direct
Размещение рекламы на форуме способствует его дальнейшему развитию
This jad file is not suitable for GAL16V8 programming, it is only for PAL16L8.
I converted it for firmware to GAL16V8 or ATF16V8.
See archive deleted
Corrected version: ATM711_CORRECTED.zip
Последний раз редактировалось Alex Shiloff; 09.02.2021 в 15:13. Причина: Correction of the firmware
Thank you very much
This helps me out a lot.
Pentagon 48 + MIKAY128 + VG93 Turbo + Stereo Covox + KJoy
Москва 128 + AY
Pentagon 1024SL 2.2 + ZXM-GS + Z-Controller + TSFM + Tape-In
ZX Evolution Rev. C + ZX-MultiSound
Compact 256 Turbo 1.1 (ZS Scorpion 256 INT, Port #FF, Port #FB) + Covox + ProfROM + NemoBus + NemoIDE + ZXM-GS
ZS Scorpion 256 Turbo+ + GMX + SMUC + GS Classic 2MB
Sprinter 2016S
К сожалению, я не говорю по-русски / Sorry, I don't speak Russian
https://github.com/zxshock
Эту тему просматривают: 1 (пользователей: 0 , гостей: 1)
Ваши права
Ответить с цитированием
