С каждой последующей прошивкой Gotek все тупее и тупее начинает реагировать на кнопки.
Вид для печати
С каждой последующей прошивкой Gotek все тупее и тупее начинает реагировать на кнопки.
https://www.dropbox.com/s/gyyzvouhyx...cu005.zip?dl=0Цитата:
Сообщение от krotan
- - - Добавлено - - -
Заведите проблему на githubе о регрессе.Цитата:
Сообщение от r3d
Если DFU, то https://www.st.com/en/development-to...-stm32080.html Только что проверял - нормально скачивается и распаковывается.Цитата:
Сообщение от krotan
Внизу страницы "Get Software". Я ей прошивал Gotek.
Перед скачкой требует регистрации по e-mail, у меня регистрация не проходит...Цитата:
Сообщение от AlexBel
krotan, не благодари.
FlashFloppy v0.15 - 8 January 2018
* Support Enhanced Gotek with SD card connector
* Board requirements are in the wiki (Hardware Mods)
* USB drive, if inserted, takes priority over SD card
* SD card is not supported for firmware update
https://github.com/keirf/FlashFloppy...oppy-v0.15.zip
FlashFloppy v1.0 - 4 February 2019
* Game/demo AutoSwap-disks feature
– No manual disk swapping, at all!
– Requires patching of host software titles
– Amiga titles so far (github:keirf/FF_AutoSwap):
- Beneath a Steel Sky
- Indiana Jones and the Fate of Atlantis
- The Secret of Monkey Island
- Monkey Island 2: LeChuck's Revenge
* FF.CFG: New OLED display-type sib-option "-narrower"
– 16-character-wide display (c.w. "-narrow" 18-char-wide)
* PC98: Direct support for HDM image files
* HxC Compat: Small fixes to Amiga file selector
https://github.com/keirf/FlashFloppy...loppy-v1.0.zip
FlashFloppy v1.1 (Stable) - 14 March 2019
* FF.CFG: Fix parsing of comma-separated values
https://github.com/keirf/FlashFloppy...loppy-v1.1.zip
FlashFloppy v2.0a (Experimental) - 14 March 2019
* IMG: Allow geometry to be manually configured in new file IMG.CFG
- See examples/IMG.CFG for documentation
- Multiple formats can be defined; distinguished by image name tags
* IMG: Support FM mode with Index Address Mark (IAM)
* IMG: Support auto-configuration of GAP3 (post data gap) when using IMG.CFG
* FF.CFG: Fix parsing of comma-separated values
* Indexed Mode: Allow arbitrary image name after "DSKAnnnn" prefix
- eg. DSKA0000_myimage.img, DSKA0002_another.adf
* Indexed Mode: Allow the "DSKA" prefix to be changed (FF.CFG:indexed-prefix=)
https://github.com/keirf/FlashFloppy...oppy-v2.0a.zip
FlashFloppy v2.1a (Experimental) - 26 March 2019
* IMG.CFG: Allow up to 256 sectors per track
* IMG.CFG: Split skew into per-cylinder and per-side values (cskew/sskew)
* IMG.CFG: Introduce image-file layout option (file-layout=):
- sequential,interleaved: Cylinder-first or side-first track ordering
- reverse-sideN: Side-N cylinders in reverse order (high to low) (N=0,1)
- sides-swapped: Ordering of disk sides is swapped in the image file
* 7-Segment LED: Display track number when an image is mounted
- FF.CFG: "display-type = led-trk"
- Displays slot number as usual during image selection/navigation
- First button press reverts to slot display; Next press begins navigation
* LCD/OLED: Display full cylinder number on displays wider than 16 columns
- Previously truncated at cylinder 99
https://github.com/keirf/FlashFloppy...oppy-v2.1a.zip
FlashFloppy v2.2a (Experimental) - 5 April 2019
* New image types supported:
- XDF: 3.5" HD eXtended Disk Format (1840kB)
- ATR: Atari 8-bit
* 7-Seg LED: Improved track display.
- Remove option 'led-trk' from FF.CFG. Track display mode is always on.
* OLED: Fix horizontal offset on SH1106 128x32 displays
* IMG.CFG: 'id' parameter simplified; 'sskew' renamed 'hskew' (head skew)
https://github.com/keirf/FlashFloppy...oppy-v2.2a.zip