Fatall (Фаталл) - копировщик для HDD/SD

[VELESOFT]

Немного модифицировал драйвер HDD, возможно проблема была в нем. Попробуй вот в таком виде. Предыдущую версию удалил.

COMPACT FLASH 256MB with FAT32 partition:
ENTER and EXIT from SCL files work correct.
ENTER to TRD file is ok, but EXIT from TRD incorrect ( right window is blue with message "DICS EMPTY" )
if I set cursor in TRD image to any file and press ENTER, then also right window is blue with message "DICS EMPTY"

Same COMPACT FLASH 256MB with FAT16 partition
All work correct !!!

[Advertiser]

[savelij]

ENTER to TRD file is ok, but EXIT from TRD incorrect ( right window is blue with message "DICS EMPTY" )
if I set cursor in TRD image to any file and press ENTER, then also right window is blue with message "DICS EMPTY"

Очень странно. Буду смотреть.

[VELESOFT]

I reformat same CF to FAT32 and copy trd+scl files to root directory. Enter and exit from SCL is correct. Enter to TRD - OK, exit from TRD incorrect....(after press enter on line signed as ".." is blue clear window with message DISK EMPTY. If press enter to any file in TRD image then in right window is chaotic chars.....

I reformat same CF card 256MB to FAT32 with clusters 512bytes:
- SCL work correct
- after enter to trd ZX blocked or show incorrect characters(chaos). Exist from trd = same chaos.

After reformat to FAT32 with clusters 512bytes,1kB,2kB is same problem. 4kB clusters is impossible use for small medium 256MB. Result: on CF 256MB is impossible work correct in FATALL if FAT32 format is used.

[VELESOFT]

I test also next small CF cards, HDD, SDtoIDE adapters with SD/MINI SD and MICRO SD cards from 64MB to 8GB formatted as FAT16 and FAT32 with different cluster sizes, partitions, etc...

Is possible in FATALL delete files ?

[savelij]

Is possible in FATALL delete files ?

Удаление пока невозможно из-за отсутствия таких функций Еще много нюансов с тем что уже есть.

---------- Post added at 15:52 ---------- Previous post was at 15:47 ----------

В каком эмуляторе с divide и образом винта можно запустить fatall для проверки?

[VELESOFT]

Удаление пока невозможно из-за отсутствия таких функций Еще много нюансов с тем что уже есть.

---------- Post added at 15:52 ---------- Previous post was at 15:47 ----------

В каком эмуляторе с divide и образом винта можно запустить fatall для проверки?

DIVIDE interface is emulated in ZX emulators: SPIN, FUSE, SPEC EMU, EightyOne. But DIVIDE interface = IDE ports + extrernal rom and ram memory. Emulators enable only full DIVIDE emulation with extra memory and disable parallel emulation of TRDOS

But I can create image of my CF card and test it in emulator UNREAL SPECCY with NEMO IDE support
Where can I find a utility for creating image of CF for UNREAL ? ( *.HDD )

[VELESOFT]

This is HDD image of my CF card 256MB with FAT32:
http://velesoft.speccy.cz/other/cf25...t32-fatall.zip
(*.HDD file for using in UNREAL SPECCY emulator)

[savelij]

This is HDD image of my CF card 256MB with FAT32:
http://velesoft.speccy.cz/other/cf25...t32-fatall.zip
(*.HDD file for using in UNREAL SPECCY emulator)

Проблема есть. Малый размер буфера для кластеров при открытии файла когда размер кластера=размеру сектора. Уничтожаются переменные фат драйвера.